Fluorite Drop Earrings

Fluorite Drop Earrings

We've combined our dreamy fluorite cabochons with our elegant rainbow fluorite cube beads which come in a range of delicate colours from lilacs to greens. Creating the perfect earring drops ready for spring and summer!

Easily customise your earrings with your favourite gemstone beads, metal beads or charms.

With the products listed in the shopping list, you will receive more headpins than needed which you can use for even more projects.


1. Begin by applying glue (we recommend using Devcon 5 Minute Epoxy glue) to the link setting and set the fluorite cabochon. Leave the dry.

2. Thread a fluorite bead onto one headpin, use the tips of round nose pliers to form a loop in the headpin just above where the beads sit at the bottom of the headpin. Hook the loop onto the end of the link setting and hold onto the loop with the tips of snipe nose pliers and wrap underneath the loop a few times to secure. Trim excess wire using side cutters and tuck in the end of the wire.

View step by step photos of how to wire wrap a bead with a headpin here

3. Use snipe nose pliers to open the loop of the earwire and connect to the top of the link setting and twist closed to secure.

4. Repeat the previous steps to complete the other earring.


Side cutters

Pair of snipe or flat nose pliers

Round nose pliers

Devcon 5 Minute Epoxy Glue

You may like to get our pack of pliers & side cutters which is an economical way of buying all the pliers you will need for every project!


Make the design your own by using other gemstone beads - make sure to check the beads will fit through the thread.

Shop gemstone beads

Shop metal beads

Shop charms


All beading and threading tutorials

How to knot Stretch Magic Thread

Kernowcraft's jewellery making kits are aimed to inspire you - therefore the step by step instructions are available online only with a shopping list, where you can easily customise the design to suit you. We recommend printing or bookmarking this page ready to follow.

The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.

What Our Customers Say...