Lapis & Turquoise Ring

Lapis & Turquoise Ring

Choose your favourite 6mm cabochon stones to complete this design! We've used lapis and turquoise as we think the mixture of the blue shades looks beautiful! This is such a simply jewellery project and would make a perfect gift for someone special.


Firstly make sure the flat base of your cabochon gemstone is nice and clean.

Take the ring and make sure that the flat plates are also nice and clean, apply a small amount of glue (we recommend Devcon 5 minute epoxy glue) on to one of the flat plates of the ring, then place your first stone on to one of the plates making sure is nice and central. Apply a little pressure to make sure the glue has coated the bottom of the stone and leave in place until it feels secure.

Wipe off any excess glue that may have spilt out with a damp cloth before it dries.

Repeat the previous steps for the second gemstone on to the other flat plate then leave this to fully dry before wearing or gift wrapping.


Make the design your own by using other gemstone cabochons or another ring setting.

Shop cabochons

Shop ring settings


How to use Devcon Epoxy Glue for jewellery making

Kernowcraft's jewellery making kits are aimed to inspire you - therefore the step by step instructions are available online only with a shopping list, where you can easily customise the design to suit you. We recommend printing or bookmarking this page ready to follow.

The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.

What Our Customers Say...