Malachite Bead Earrings Bundle

We've created a simple pair of wire wrapped bead earrings in no time at all Make the perfect treat for yourself or a gift for someone special.

This is a great beginner project, which doesn't require any soldering.

Bundle contents:

• 20cm of Recycled sterling silver round wire 0.8mm diameter 20 gauge
• 2 x Malachite round beads 8mm
• 2 Sterling silver large 5x4mm earring backs

Step by step instructions

1. Use side cutters to cut 10cm of wire - this will give you enough for your post and excess for wire wrapping.

2. The bead we have used is 8mm. On one end of the wire use pliers to bend 0.8mm of wire at a right angle. Thread the short end through the bead hole.

3. Hold the bead securely and wrap 2 full circles around the bead.

4. Use pliers to create another right angle in line with the hole that has the wire in it.

5. Bend the wire over the bead to the base of the bead.

6. Create another right angle away from the base of the bead. This will form the post.

7. Use side cutters to cut the wire at 1cm to form the post.

8. Use a file to smooth the end of the wire as this needs to be smooth and safe to insert through your pierced ear lobe.

9. Work harden the earring post by squeezing with nylon jaw pliers. (An alternative way to harden the wire is to place the hoop onto a steel block and tap gently using a rawhide mallet or chasing hammer.)

10. Next create a notch on the ear post where the earring scroll will sit. If you have limited tools, the simplest way to do this is by using wire cutters to hold onto the wire and twist.

11. Attach the earring scroll onto the post - these can be adjusted to make tighter or looser if needed.

10. Repeat for the other earring.

Your earrings are now complete

The beauty of wire wrapping is that you can experiment with your designs such as adding more loops or using other beads. Have fun and get creative!

Suggested tools

You may like to get our pack of pliers & side cutters which is an economical way of buying all the pliers you will need for every project!