Product Code: C94
This Argotect Flux comes in a 15g pack and can be used with all our types of solder. The great thing about this best-selling and versatile flux is that it helps to prevent the fire-stain which can appear during the polishing process, especially on larger or flatter surfaces. Fire-stain can prove tricky to remove and often the only solution is to sand and re-polish the whole piece so using this flux can save lots of valuable time and materials when finishing.
The powder should be mixed to a smooth paste with water (a few drops of detergent may be added too) and applied to the clean and de-greased solder joint with a flux brush before assembly. Extra flux paste should then be applied to either side of the join to ensure a good flow and a solid join is achieved. Apply heat to the whole piece to ensure that the correct temperature is achieved and maintained until the solder melts and flows.
No-one has reviewed this item yet. Be the first and help to advise the jewellery making community, your opinions are really valued.
Orders placed before midday are despatched the same day (wherever possible).
|UK Standard||Calculated in shopping basket||£2.99 - £4.99|
|UK Next Day Delivery*||Calculated in shopping basket||from £7.95|
|UK Saturday Delivery||Calculated in shopping basket||from £14.00|
|Europe||Calculated in shopping basket||from £5.95|
|All Other Countries||Calculated in shopping basket||from £6.95|
*Orders for Next Day Delivery must be placed before 12pm. You will receive your order the following day not including Saturday & Sunday (Deliveries for highlands & islands may take a little longer). Next day Delivery and Saturday Delivery are signed for services.
*Orders for Next Day Delivery over 1.5Kg must be placed before 10.30am. You will receive your order the following day not including Saturday & Sunday (Deliveries for Highlands & islands may take a little longer).