Sterling Silver Serrated Edge Bezel Cups For Cabochons
Sterling Silver Serrated Edge Bezel Cups For Cabochons
These 3mm serrated edge sterling silver bezel cups provide a way to set
Simply solder to your design and rub the cup bezel over the stone using a bezel rocker or burnisher until your stone is held securely in place
Cup heights approximately:
- 3mm =1.8mm
- 4mm = 2.2mm
- 5mm = 2.2mm
- 6mm = 2.44mm
- 8mm = 2.69mm
- 8x6mm = 1.83mm
- 10x8mm = 2.09mm
- Available in round and oval sizes
- Sold individually
- Suitable for cabochon stones only
- Due to the manufacturing process (die-struck), the bezel cups become work-hardened so will require annealing (the process of softening metal by heating with a gas torch) prior to setting. As they are designed for soldering onto your design this will most likely happen during the soldering process so will not require additional annealing
- As commercially cut stones have a size tolerance you may need to work on these bezel cups prior to fitting your desired stones
Click below to read our helpful pages:
Product code: S94