These serrated edge bezel cups provide a way to set your cabochons with a neat and professional finish.

Simply solder to your design and you're ready to set your stone!

Cup heights approximately:

• 4mm=2.2mm
• 5mm=2.2mm
• 8mm=2.9mm
• 8x6mm=2.3mm
• 10x8mm=2.1mm

• Available in round and oval sizes
• Sold individually
• Suitable for cabochon stones only
• Made from fine silver (99.9%) which means there is less likely to be any oxidisation during the soldering process and therefore there is less likely to be any fire scale
• Can be set straight into wet or dry silver clay perfect for setting gemstones that will not withstand being fired
• Due to the manufacturing process (die-struck), the bezel cups become work-hardened so will require annealing (the process of softening metal by heating with a gas torch) prior to setting. As they are designed for soldering onto your design this will most likely happen during the soldering process so will not require additional annealing
• As commercially cut stones have a size tolerance you may need to work on these bezel cups prior to fitting your desired stones