Green Aventurine And Leaf Charm Necklace

Green Aventurine And Leaf Charm Necklace

This is such a simple necklace project and perfect for the nature lover in your life.

This kit provides you with more beads, wire and jump rings needed so you can make more similar creations.

STEP BY STEP INSTRUCTIONS

1. Start by wire wrapping you bead. Cut a length of wire about 10-15cm long and form a loop with round nose pliers.

2. Twist the wire around and fix the loop in place, you will need to snip off any excess wire with side cutters and squeeze the end of the wire for a neat finish.

3. Thread the aventurine bead onto the wire and start to form another loop. Wrap the wire around the loop to secure it in place and trim any excess wire.

4. Using a pair of snipe nose and flat nose pliers, open a 3.5mm jump ring and attach one end of the beaded wire by the loop and the leaf charm by the loop at the top of the charm before closing the jump ring again.

5. Open another 3.5mm jump ring with with snipe nose and flat nose plies and attach the opposite end of the beaded wire by the loop and add the chain before closing the jump ring.

RECOMMENDED TOOLS FOR THIS PROJECT

Side cutters

Snipe nose pliers or flat nose pliers

Round nose pliers

You may like to get our pack of pliers & side cutters which is an economical way of buying all the pliers you will need for every project!

CUSTOMISE YOUR KIT

Make the design your own by using other gemstone beads and charms.

Shop gemstone beads

Shop charms

JEWELLERY MAKING BOOKS

The New Encyclopedia Of Jewellery Making Techniques - Jinks McGrath

The Encyclopedia of Wire Jewellery Techniques By Sarah Withers


Kernowcraft's jewellery making kits are aimed to inspire you - therefore the step by step instructions are available online only with a shopping list, where you can easily customise the design to suit you. We recommend printing or bookmarking this page ready to follow.

The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.


What Our Customers Say...

;