Are you thinking of making these as a gift? Why not add a presentation box or gift bag to your order.
1. Firstly, check that the pegs on the earring settings are not too long, the beads should be flat on the earring settings when you push them into the pegs. If necessary you can simply use a pair of snips to trim the peg slightly.
2. Apply glue to the earring pegs, set the beads and leave to dry. We suggest supporting your posts in a piece of blue tack while you set the stones.
3. Use snipe nose pliers to twist open the loop on the earstuds and attach the dragonfly charms, then twist closed.
4. Attach the earring scrolls and your design is complete!
Devcon 5 Minute Epoxy Glue - For super-fast, high strength, high-quality bonds
Snips (also known as straight metal shears) are ideal for cutting sheet metal and wire so an indispensable tool in your kit
Snipe nose pliers - or opening and closing loops
Make the design your own by using
The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.
You can buy all the products in this collection at once by clicking the button below or add individual products by clicking the button beside each one.
Total price: £0.60
Total price: £3.70
Total price: £5.30
Total price: £7.99