Sea Glass Ring

Sea Glass Ring

We love collecting sea glass but what can you do with it? Make your own handmade jewellery!

This ring project is so easy and you only need a few supplies.


Choose your pieces of sea glass that will fit on the 8mm flat plate ring.

You may find it easier to stick the ring into some blue tac to keep it in place, leaving both your hands free to apply the glue.

Firstly, you need to make sure the sea glass and flat plate are clean.

You can use sandpaper to gently rough up the area that the sea glass will attach to the flat plate - this will make allow a stronger bond.

Apply a small amount of Devcon 5 minute epoxy glue to the flat plate, then place your piece of sea glass and apply a little pressure to make sure the glue has coated the bottom of the glass and leave in place until it feels secure.

If necessary you can wipe off any excess glue with a cloth before it dries.

Allow to fully dry and you ring is complete!

Watch our video with more sea glass jewellery ideas to try...


Make the design your own by using gemstone cabochons or another setting.

Shop cabochons

Shop settings


How to use Devcon Epoxy Glue for jewellery making

The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.

Your shopping list

There are one or more items out of stock at present.

Silver Plated Ring With 8mm Flat Plate

Quantity: 1
Total price: £3.55

Sorry, this item is currently unavailable.

Devcon 5 Minute Epoxy Glue

Quantity: 1
Total price: £7.99