Key & Heart Charm Bracelet

This bracelet is subtle and elegant, It's simple design leaves the beauty of the faceted purple heart gemstone and sterling silver charm to speak for itself.

Are you thinking of making this as a gift? Why not add a presentation box or gift bag to your order.

Step by step instructions

Start by glueing your faceted heart into the sterling silver peg. We recommend using Devcon 5 minute epoxy glue for super-fast, high-strength, high-quality bonds.

Prepare the glue by mixing in a small dish. Use a fine point such as a cocktail stick to dab a bit of glue onto the cap of the peg and gently place it in the half-drilled hole in the bead.

Once mixed, the glue sets in 5 minutes, so ensure you set your bead straight away. Gently place it down and leave it to set.

Attach a 5mm jump ring to the bracelet.

Before you close up the 5mm jump ring, attach the faceted heart and key charm.

Use flat nose or snipe nose pliers to open and close your 5mm sterling silver jump ring.

Suggested tools for this project

Devcon 5 Minute Epoxy Glue - For super-fast, high strength, high quality bonds

Flat nose pliers or Snipe nose pliers

CUSTOMISE YOUR KIT

Make the design your own by using your favourite jewellery supplies.

Shop top drilled beads

Shop charms

Shop chain

HELPFUL PAGES

How to use top drilled beads

How to open and close a jump ring

How to use Devcon Epoxy Glue for jewellery making

Kernowcraft's jewellery making kits are aimed to inspire you - therefore the step by step instructions are available online only with a shopping list, where you can easily customise the design to suit you. We recommend printing or bookmarking this page ready to follow.

The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.