SHOP NEW ROSE CUT CABOCHONS

Chocolate Moonstone Slice Necklace

Chocolate Moonstone Slice Necklace

A simple necklace project using a beautiful chocolate moonstone slice. This stunning slice bead looks so elegant mixed with the gold plated chain.

This kit provides you with more wire and jump rings than needed so you can make more similar creations.

STEP BY STEP INSTRUCTIONS

Simply cut a length of wire about 10cm long and use this to wire wrap the chocolate moonstone slice.

Slip your bead onto the wire, leaving approximately 2cm at one end (the other end will be longer). Pinch both ends of the wire together at the top of the bead. Check that the bead is centred.

Use side cutters to cut off the end of the short side of wire, so that it is only about 2-3mm above the bead. Next form a loop with the longer side of wire by bending it to a right angle and wrapping it around the tip of your round nose pliers.

Make sure the loop is above the end of the short side of the wire and centre of the bead.

Switch to using the snipe nose pliers and hold the loop flat between the tips.

Take the long length of wire between your fingers and hold it taught. Start wrapping it around the stem of the wires - starting at the base of the loop and working down towards the bead.

Make sure that each wrap sits neatly and close to the last.

When you reach the top of the bead trim the end neatly with the side cutters.

If there is a sharp end left bend it gently with the snipe nose pliers so that it sits flat and is tucked neatly away, so it will not snag on clothing.

Twist open a 4mm jump ring using snipe nose pliers and attach to the top loop. Thread the chain through the jump ring to finish.

Why not view our selection of presentation boxes to complete the look and make a beautiful gift?

RECOMMENDED TOOLS FOR THIS PROJECT

Side cutters

Snipe nose pliers

Round nose pliers

CUSTOMISE YOUR KIT

Make the design your own by using other gemstone beads and charms.

Shop gemstone beads

Shop charms

Shop necklets and chains

JEWELLERY MAKING BOOKS

The New Encyclopedia Of Jewellery Making Techniques - Jinks McGrath

The Encyclopedia of Wire Jewellery Techniques By Sarah Withers


The suggested products used in this project are suggestions to inspire you. Products used were compatible at the time of making but do be aware that gemstones are natural and hand cut stocks can vary, so do use your own common sense as to the compatibility of each item when making.

Your shopping list

You can buy all the products in this collection at once by clicking the button below or add individual products by clicking the button beside each one.

Total price for all items: £11.75

9ct Gold Plated Wire

Quantity: 1
Total price: £5.65